Тема в разделе "Выбор новой Audi", создана пользователем alien31, 8 авг 2010 .
Вы используете устаревший браузер. Этот и другие сайты могут отображаться в нём некорректно.
Необходимо обновить браузер или попробовать использовать другой.
Fordy_Deluxe
Registered
I’m hoping for assistance, iv done what feels like extensive research including taking half my car apart but don’t seem to be getting anywhere.
For reference my car is a 12 plate sport line RHD
I have the message on the dashboard and have research that it is 1 of 2 things — the arm on the suspension arm or the control module.
I was originally told the arm was the likely fault and that it was on the NSF wishbone. I took the wheel off and this was not the case, after a little more research I found that I have the arm on the NSR wishbone, iv checked this and it appears to be in working order, nothing snapped, no snagged wires or lose connections.
I then tried to find the control module itself with no luck. I have found a picture of what I believe I am looking for, a small black plug with 21 pins. I removed the glove box, and carpet down to the bulk head, and I even had a look on the driver side and I cant seem to find it.
Can anyone help?
Kelvm77
Registered
Yes bud we can help.
But we need some more info from you a introduction from yourself would be a start also pics and spec of your Audi sorry to come over blunt but these are the rules I can help you no exactly what the problem is and so will other A5OC members :thumbsup:
Get involved is what I am saying this is your first post :grin2:
Fordy_Deluxe
Registered
My apologies, I’v just done exactly that.
I used to use forums alot back in the day when I lived in South Wales and used to go to all the shows but I’v not been about for a while so I appear to have forgotten forum etiquette.
I notice where you’re from. I’m moving to Mansfield next month, any local meets?
danjwilson
Registered
My apologies, I’v just done exactly that.
I used to use forums alot back in the day when I lived in South Wales and used to go to all the shows but I’v not been about for a while so I appear to have forgotten forum etiquette.
I notice where you’re from. I’m moving to Mansfield next month, any local meets?
Meets are quite rare these days, and usually just arranged locally. I live in Worksop and work in Mansfield, so would be up for a get together.
Sent from my iPhone using Tapatalk Pro
Current — A5 (B9) 2.0TFSI Sportback quattro — 252PS — Daytona Grey
Previous — A5 3.0TDI quattro Coupe Blk Ed+ S-Tronic — Daytona Grey
Previous — A5 3.0TDI quattro, Blk Ed, S-Tronic — Glacier
Previous — A5 3.0TDI quattro Sport Coupe — Silver
fatmarl
Registered
I’ve got the same message on my A5 at the moment. VCDS gives:-
Address 55 : Xenon Range Labels ; 8K0-907-357.clb
Part No. 8K0 907 357 B
Component : Dynamische LWR H01 0030
Revision : 00000001 Serial number
Coding : 0000002
Shop #: WSC 06324 000 00000
VCID : 3467FA5B57CEB4BE40B-8061
2 Faults Found:
00496 – Sensor for Vehicle Leveling; Front
008 – Implausible Signal – Intermittent
Freeze Frame:
Fault Status : 00101000
Fault Priority : 2
Fault Frequency ; 50
Reset Counter : 218
Mileage : 135810 km
Time Indication : 0
Date : 2019.02.17
Time : 15:57:03
00496 – Sensor for Vehicle Leveling ; Front
010 – Open or Short to Plus – Intermittent
Freeze Frame:
Fault Status : 00101010
Fault Priority : 2
Fault Frequency ; 41
Reset Counter : 3
Mileage : 135810 km
Time Indication : 0
Date : 2019.02.17
Time : 15:57:03
I replaced the front levelling sensor last year, the original one showed no signs of damage and the arm was intact so even if it looks OK it can still be goosed. The replacement could have gone tits up but the part number given by VCDS is for the control module. I’ll probably replace the front sensor again as it’s an easy job to do, if the error message doesn’t clear I’ll replace the control module (if I can find it).
